Lutron Lighting Control in Frisco, TX

It follows the number of controlled loads, whether the system is wired or wireless, and how many keypads replace switches. After a complimentary consultation we write a line-item proposal for your house. We do not publish a single figure, because a two-room retrofit and a whole-home wired system are not the same project.

Yes. The wireless Lutron line replaces existing switches and adds battery-powered Pico remotes and keypads without opening walls. Wired systems are the cleaner answer during construction, but a retrofit is routine work here, and it can be phased room by room or floor by floor.

No. Lighting works on its own — keypads, dimmers, and scenes, with no controller in the closet. If you later add a Control4 or Savant system, the same lighting joins it, and the scenes you already use become part of larger routines like Goodnight or Away.

Tunable fixtures such as Ketra shift color temperature through the day — cooler and brighter in the morning, warmer in the evening. It matters most in rooms with little daylight and in spaces where the finishes change character under different light. It is a specification choice, not a default; we say where it earns its cost and where standard dimming is the better spend.

Nothing you would notice. Keypads and dimmers talk to each other inside the house, so scenes keep running. Phone control from outside the house is the part that waits for the connection to come back.

The same Plano team, working from the project file that holds your current scene levels. Call (469) 666-0747 during posted hours (Mon–Fri 9:00 AM – 6:00 PM · Sat 10:00 AM – 1:00 PM).

It replaces rows of unrelated switches with dimmers, engraved keypads, and named scenes. One press can set several fixtures to the levels chosen for cooking, dining, relaxing, or leaving. The system can run by itself, or later join Control4 or Savant so lighting works with shades and other house routines.

Yes. Lighting can cover one room, the main floor, or the whole house, and rooms can be added later against the same design. A finished-home retrofit can be phased room by room or floor by floor. During a kitchen or primary suite renovation, we scope that room and leave the panel sized for the rest of the house later.

Yes. On new construction, we coordinate with your electrician on load schedules and your builder on box heights before drywall. The design includes a wiring drawing for the electrician. For a finished home, we prepare a wireless plan identifying which switches will be replaced.

Ask for a load schedule and a keypad layout on your floor plan before equipment is named. Confirm button engraving and plate finishes are chosen before ordering, scene levels are set at the hour they are meant for, and a revision visit follows the first week. As a Lutron Gold Dealer, we design, program, and service the system from Plano and plan it so it can be tied into a Control4 or Savant system later where the products support that.

Open walls call for wired controls placed with the rough electrical, with panels, keypad boxes, and a lighting closet set before drywall. Finished walls usually suit wireless controls that replace existing switches and add keypads with little or no wall work; we confirm the wiring at each box first. Both run the same scenes from engraved keypads. The walkthrough decides which method fits your house, and finished-home work can be phased room by room or floor by floor.

Rooms with banks of switches that all look alike: the kitchen, great room, primary suite, and entries. Kitchens gain a bright island level with a low perimeter for dinner, and entries gain an All Off at the door the family leaves by. Bedrooms and media spaces gain dimmed scenes for evening. Start with the rooms that fight you daily, then add rooms later against the same design.

Yes. Our office is in Plano, and we install Lutron lighting in Frisco, Plano, McKinney, Allen, Prosper, Dallas, and Southlake. New construction gets a wiring drawing for the electrician before drywall, and finished homes get a wireless plan that names every switch to be replaced. Jobs start with a complimentary consultation and a walkthrough, then a written line-item proposal.