How to measure your seating distance
Measure from your eyes in your usual seated position to the TV screen, not to the wall behind it. Enter feet and inches, or select meters. If the TV has not been bought yet, measure to the spot where the screen will be, taking the depth of a stand or wall mount into account.
If you already own a TV, choose "The TV size I own or like" instead and enter its diagonal in inches. The calculator then gives the range of seating distances that suits that size. Calculate each row of seats separately if the room has more than one.
What are the 30 and 40 degree viewing angles?
The lower end of the range uses a historical cinema reference from SMPTE EG 18-1994, section 3 (PDF), which discusses images appearing small below roughly 30° of horizontal vision. It was withdrawn in 2003; this calculator treats it as a historical reference, not a current requirement.
The upper end approximates THX’s home-TV distance rule: divide the screen diagonal in inches by 0.835 to get the ideal maximum couch-to-TV gap in inches. For a 16:9 screen, that ratio gives approximately 40° horizontally. This angle is a geometric interpretation of the ratio.
How does TV resolution change the viewing distance?
The calculator uses a common convention: 20/20 vision resolves detail down to 1 arcminute. One pixel subtends 1 arcminute at a distance equal to the pixel pitch divided by tan(1 arcminute). Pixel pitch is the panel width divided by the number of horizontal pixels: 1920, 3840 or 7680.
This is a convention, and individual eyesight varies. A viewer with 20/20 vision sitting nearer than that distance may see individual pixels. At typical living-room distances, 4K and 8K rarely change the answer, while 1080p narrows it for larger sizes. Treat the result as a comparison, not a rule.
What is the rule of thumb for TV size?
The same geometry gives a quick check: the diagonal is about 0.615 to 0.835 times your seating distance, from the 30° and 40° presets on a 16:9 panel. At 10 ft (120 in), that works out to 73.8 to 100.2 inches. These are computed values, not product recommendations.
Use the range as a starting point. Rooms, eyesight and the content you watch all affect what feels right, so confirm the size in the room before you buy.
What does the calculator leave out?
It does not account for bezels, glare, brightness, room lighting, off-center seats, the vertical viewing angle or mounting height. The result is the active image of a flat 16:9 panel viewed from its centerline. Compare the TV’s real chassis and stand width with the space you have.
Check the wall, the furniture and the other equipment that must share the space. The calculator cannot see any of them.
Where is the TV size chart?
The TV size chart above the guide lists common diagonals with their width, height and the closest and farthest seats for a 4K panel. It is part of the page, so it reads without JavaScript. Scroll the table sideways on a narrow screen.
What if you are planning a projection screen?
Use the home theater screen size calculator for projection screens and 2.35:1 images. It works from seating distance and viewing angle and shows width, height and diagonal for each preset.
How to plan the rest of the theater
Read the projector versus TV comparison guide for the surrounding room decisions. For help turning your measurements into an installation plan, see our home theater installation service and our whole-home audio and video service.

