How to find your projector’s throw ratio
The throw ratio is on the projector’s spec sheet, usually written as a distance to width ratio such as 1.5 : 1. Enter the number before the colon. A zoom lens lists a range, for example 1.4 to 1.8: enter the lower number as the wide end and the higher number as the long end.
Manufacturers label ultra-short, short and standard throw differently, so use the number rather than the label. Enter the ratio, not a model name. The starting value of 1.5 is an example only.
How the calculation works
Throw distance equals the throw ratio multiplied by the image width. The calculator finds the image width from the screen diagonal and aspect ratio, and the height and diagonal follow from the same shape. Going the other way, it divides the throw distance by the throw ratio to get the image width.
With a screen size and a distance, it divides the distance by the image width to give the throw ratio a projector would need. A zoom lens can cover any ratio inside its range.
How a zoom lens changes the answer
For one screen size, a zoom lens gives a range of distances: the wide end places the lens closest and the long end farthest. Anywhere in that range works, which gives some freedom over where the projector sits.
From one fixed spot, a zoom lens gives a range of image sizes instead. The widest image comes from the wide end of the zoom and the narrowest from the long end.
What the calculator does not cover
The calculator does not model lens shift, vertical offset or mounting height, keystone correction, or where on the projector the distance is measured from, such as the lens or the front of the housing. It also ignores screen gain, room light and brightness, and a wall or recess that might be in the way.
Check the projector’s installation manual for the throw distance table and the mounting position before you drill or run cable.
Choose the screen size first
If you have not picked a screen size yet, start with the home theater screen size calculator. It converts seating distance and viewing angle into image width, height and diagonal. Then bring that size back here to find the projector distance.
How to plan the rest of the theater
Read the Projector buying guide for the surrounding room decisions. For help turning your measurements into an installation plan, see our home theater installation service.

